Abstract
This paper presents the extension of a flexibility-based large increment method (LIM) for the case of cyclic loading. In the last few years, LIM has been successfully tested for solving a range of non-linear structural problems involving elastoplastic material models under monotonic loading. In these analyses, the force-based LIM algorithm provided robust solutions and significant computational savings compared to the displacement-based finite element approach by using fewer elements and integration points. Although in cyclic analysis a step-by-step solution procedure has to be adopted to account for the plastic history, LIM will still have many advantages over the traditional finite element method. Before going into the basic idea of this extension, a brief discussion regarding LIM governing equations is presented followed by the proposed solution procedure. Next, the formulation is specified for the treatment of the elastic perfectly plastic beam element. The local stage for the beam behavior is discussed in detail and the required improvement for the LIM methodology is described. Illustrative truss and beam examples are presented for different non-linear material models. The results are compared with those obtained from a standard displacement method and again highlight the potential benefits of the proposed flexibility-based approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.