Microscopic instabilities in single crystal matrix composites

Abstract

A finite strain micromechanical analysis is presented for the prediction of the loss of microscopic stability of a class of metal matrix composites that are subjected to axial compressive loading and undergoing large deformations. The metallic constituent behavior is modeled by the single crystal anisotropic plasticity theory in which, due to the resolved shear stresses, plastic deformations occur along certain pre-defined slip planes. Thus, this incremental plasticity theory is capable of providing the effect of the applied axial loading on the induced shear stresses which dominate the microbuckling. The composites are assumed to possess slight imperfections at the interfaces, and in order to satisfy the interfacial conditions, a perturbation expansion is employed which yields zero and first order micromechanical analysis problems. The zero order problem corresponds to the micromechanical modeling of the composite with no imperfections, whereas the solution of the first order problem is utilized to obtain the critical stresses and deformations at which bifurcation buckling occurs. Both problems are solved by employing the finite strain high-fidelity generalized method of cells (HFGMC) micromechanics. Applications are given for various types of single crystal matrix composites including layered, particulate, continuous and short fiber composites. Finally, a comparison between the compressive strengths of a standard metal matrix boron/aluminum and SiC/single crystal composites is presented and discussed.