Abstract
The acoustic properties of a compound micro-perforated panel (MPP) absorber array are investigated. The absorber array consists of three parallel-arranged MPP absorbers with different cavity depths. A finite element procedure is used to simulate its acoustic behaviors under normal incidence. Experimental studies are carried out to verify the numerical simulations. Due to different reactance matching conditions in the absorber array, strong local resonance occurs and the corresponding local resonance absorption dominates. Compared with single MPP absorber, the absorber array requires lower acoustic resistance for good absorption performance, and the resonance frequencies shift due to inter-resonator interactions. The different acoustic resistance requirement is explained by considering the reduced effective perforation rate of the MPP in the absorber array. The performance of the absorber array varies with the sizes and spatial arrangement of the component absorbers. When the distance between component absorbers is larger than a quarter-wavelength, the above-mentioned parallel absorption mechanism diminishes. In the experimental study, the normal incidence absorption coefficients of a prototype MPP absorber array are tested. The measured results compare well with the numerical predictions. The experimental study also shows that although other absorption mechanisms may exist, dissipation by the MPP is dominant in the MPP absorber array.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.