Abstract
The hydrolysis of aluminum (Al) is a relatively simple method for on-demand hydrogen generation for niche (low-power, <1 kW) proton exchange membrane fuel cell applications. The hydrolysis of Al in neutral pH water and under standard ambient conditions is prevented by the presence of a thin surficial oxide layer. A promising method to enable Al's spontaneous hydrolysis is by its mechanochemical activation (ball milling) with certain metals (e.g., Bi, Sn, In, Ga). This overview presents several aspects relating to the changes occurring in Al particles during ball milling, e.g., the structural and morphological behavior of Al during ball milling procedures (with and without the presence of activation metals), and the distribution and homogenization of Al and various activation metals. The formation of galvanic cells between anodic Al and cathodic activation metals (relative to Al) is discussed. A summary of the existing Al composites for on-demand hydrogen generation is presented. The paper concludes with a discussion of activation metal recovery, and the effects thereof on the economic feasibility of Al composites for hydrogen generation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.