Abstract
Self-reinforced polypropylene composites (SRPPC) were manufactured with film stacking method at different processing temperatures (T=150–175°C) at a constant pressure of 5.5 MPa and holding time of 90 s with a nominal reinforcement content of 50 wt-%. For reinforcement carded PP, for matrix random PP copolymer films with two different melt flow rate (MFR) values were used. Static tensile and dynamic falling weight impact tests were performed on the manufactured SRPPC sheets. To characterise the consolidation light microscopic pictures were taken on the polished cross-section, and the density and the interlaminar strength were determined. Based on the results, the optimal processing temperature was deduced.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call