Abstract

Optical spectrometers enable contactless chemical analysis. However, decreasing both their size and cost appears to be a prerequisite to their widespread deployment. Chip-scale implementation of optical spectrometers still requires tackling two main challenges. First, operation over a broad spectral range extending to the infrared is required to enable covering the molecular absorption spectrum of a broad variety of materials. This is addressed in our work with an Micro-Electro Mechanical Systems (MEMS)-based Fourier transform infrared spectrometer with an embedded movable micro-mirror on a silicon chip. Second, fine spectral resolution Δλ is also required to facilitate screening over several chemicals. A fundamental limit states that Δλ is inversely proportional to the mirror motion range, which cannot exceed the chip size. To boost the spectral resolution beyond this limit, we propose the concept of parallel (or multi-core) FTIR, where multiple interferometers provide complementary optical paths using the same actuator and within the same chip. The concept scalability is validated with 4 interferometers, leading to approximately 3 times better spectral resolution. After the atmospheric contents of a greenhouse gas are monitored, the methane absorption bands are successfully measured and discriminated using the presented device.

Highlights

  • Fourier transform infrared (FTIR) spectrometers appear to be a promising option since their broad spectral range enables covering the absorption molecular spectrum of a broad variety of materials, including gases, liquids and solids

  • The input light is injected into the different interferometers by means of an optical fibre bundle, where the interferometers are implemented using the micro-optical bench (MOP) technology[40]

  • The practical implementation of the concept of parallel FTIR spectrometers was achieved in this work based on standard Mechanical Systems (MEMS) technologies on a centimetre-scale chip

Read more

Summary

Introduction

Operation over a broad spectral range extending to the infrared is required to enable covering the molecular absorption spectrum of a broad variety of materials This is addressed in our work with an Micro-Electro Mechanical Systems (MEMS)-based Fourier transform infrared spectrometer with an embedded movable micro-mirror on a silicon chip. Better resolution could be achieved, but at the loss of the advantage of monolithic integration, leading to challenging alignment and high assembly costs; for instance, a resolution of ~25 cm−1 in the spectral range from 2 to 5 μm[36] has been obtained with a 3-mm-diameter MEMS mirror that requires further assembly with other discrete components to form the interferometer. In all FTIR spectrometers, the spectral resolution Δλ is inversely proportional to the mirror travel range Δx, i.e., Δλ ~ 1/Δx, such that achieving fine spectral resolution requires a large travel range

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call