Abstract
Solvent-based CO2 capture technologies hold promise for future implementation but conventional solvents incur significant energy penalties and capture costs. Phase-change solvents enable a significant reduction in the regeneration energy but their performance has only been investigated under steady-state operation. In the current work, we employed a systematic approach for the evaluation of conventional solvents and mixtures, as well as phase-change solvents under the influence of disturbances. Sensitivity analysis was used to identify the impact that operating parameter variations and different solvents exert on multiple CO2 capture performance indicators within a wide operating range. The resulting capture process performance was then assessed for each solvent within a multi-criteria approach, which simultaneously accounted for off-design conditions and nominal operation. The considered performance criteria included the regeneration energy, solvent mass flow rate, cost and cyclic capacity, net energy penalty from integration with an upstream power plant, and lost revenue from parasitic losses. The 10 investigated solvents included the phase-change solvents methyl-cyclohexylamine (MCA) and 2-(diethylamino)ethanol/3-(methylamino)propylamine (DEEA/MAPA). We found that the conventional mixture diethanolamine/methyldiethanolamine (DEA/MDEA) and the phase-change solvent DEEA/MAPA exhibited both resilience to disturbances and desirable nominal operation for multiple performance indicators simultaneously.
Highlights
The development of efficient CO2 abatement systems is widely pursued as a means of mitigating the detrimental effects of global warming [1]
The selection of efficient solvents or mixtures in solvent-based CO2 capture plays an important role in the process configuration, the regeneration energy requirements, and the process economics [9]
While the development of new solvents has been an active research field, the ones proposed to date have not managed to reduce the regeneration energy requirements by more than 25% compared to the reference monoethanolamine (MEA) solvent, with detrimental effects on the reduction of capture costs [1]
Summary
The development of efficient CO2 abatement systems is widely pursued as a means of mitigating the detrimental effects of global warming [1]. The previous discussion highlights the increasing interest in the off-design behavior of CO2 capture systems and shows that this is mainly approached through the use of rigorous dynamic and/or rate-based models in dynamic mode along with a suitable control structure Such models are indispensable for the accurate determination and evaluation of the process operation under varying conditions but often require intense effort to construct and execute. This is greatly amplified when there is a need to investigate the performance of multiple different solvents and further enhanced when such solvents include mixtures exhibiting liquid–liquid phase-change behavior. The nonlinear sensitivity assessment highlights that certain economically desirable solvents may not be as attractive under off-design conditions
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.