Abstract
Energy efficiency analysis system need to be widely deployed to collect energy consumption data in a timely schedule and also the online monitoring integrated with dynamic analysis. Smart metering system have similar functions and can be used with some equipment reformation, but the now exist system can not be used in a plug-and-play manner, which is the main constraint on large scale deployment. In this paper, a novel distributed measuring approach is proposed with only one modification of the incoming line to monitoring the bus voltage. While other sensor nodes that deployed at several monitor point are designed with integrated communication and measurement component, which can be used online without blackout or power line interruption. Standard IEEE 802.15.4 beacon frame payload is extended on the concentrator side, and thus the zero position sequence (ZPS) and selected full sampling in one period is conveyed in the extended frame to assist each distributed measurement and synchronization. To verified the feasibility of the proposed distributed measurement by using wireless sensor network, we established online energy efficiency analysis testbed (OEEABed), experimental results are presented to illustrate the effect of both network performance and signal processing parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.