Abstract
AbstractThe first dielectric elastomer actuators based on electroactive nanocomposites with octakis(phenyl)‐T8‐silsesquioxane (phenyl‐T8), obtained ex‐situ, used as voltage stabilizer filler for silicone elastomers are reported. The incorporation and homogeneous dispersion of crystalline phenyl‐T8 in percentages of 2.5, 3.5, 5, and 10 into the amorphous matrix consisting in a polydimethylsiloxane‐α,ω‐diol with Mn = 240,000 g/mol was successfully achieved by solution mixing and crosslinking. For the sample with the best actuation performance (that containing 3.5 wt.% filler), an optimized filled elastomer was obtained by dispersing 3.6 wt. % phenyl‐T8 in the matrix using a suitable surfactant (Pluronic L81), thus gaining an increased electrical breakdown of 30% compared with the pristine sample. Beside dielectric strength, the matured films were characterized in terms of morphology, mechanical, dielectric and actuation tests. In spite of structural incompatibility between the filler and the matrix, the obtained materials are soft elastomers showing high strain (~800%) and low Young's modulus of 50–100 kPa. The use of phenyl‐T8 in a silicone matrix lead to electroactive films with slightly increased lateral actuation strain and electric breakdown strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.