Abstract
Isothermal fatigue (IF) tests were carried out on the gamma-TiAl alloy in the temperature of 500°C, 650°C and 800°C under mechanical strain control in order to evaluate its cyclic deformation behaviors at elevated temperature. Cyclic deformation curves, stress-strain hysteresis loops under different temperature-strain cycles were analyzed and dislocations configurations were also observed by TEM. The mechanism of cyclic hardening or softening during IF tests was also discussed. Results show that during the IF tests, The hysteresis loops were almost symmetrical above 600 °C, such as 650 °C and 800 °C; The hysteresis loops at the temperature of 500 °C generated two apparent asymmetry, one was zero asymmetry, the other was tensile and compressive asymmetry; Dislocation configuration and slip behaviors are contributed to cyclic hardening or cyclic softening.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.