Abstract
The Young’s modulus of diamond-like carbon (DLC) pillars was measured by means of mechanical vibration using scanning electron microscopy. The DLC pillars were grown using Ga+ focused ion beam-induced chemical vapor deposition with a precursor of phenanthrene vapor. The Young’s modulus of the DLC pillars was around 100 GPa at vapor pressure of 5×10−5 Pa and it had a quality (Q) value of resonance exceeding 1200. There seemed to be a balance between the DLC growth rate and surface bombardment by the ions, and this played an important role in the stiffness of the pillars. Some of the DLC pillars showed a very large Young’s modulus over 600 GPa at low gas pressure conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
