Abstract
PurposeThe purpose of this paper is to evaluate differences between the results of constant property and variable property approaches in solving the problem of Al2O3-water nanofluid heat transfer in an annular microchannel. Also, the effect of nanoparticle diameter on flow and heat transfer characteristics is investigated.Design/methodology/approachThermo-physical properties of the nanofluid including density, specific heat, viscosity and thermal conductivity are assumed to be temperature dependent. Governing equations are descritized using the finite volume method and solved by SIMPLE algorithm.FindingsThe results reveal that the constant property assumption is unable to predict the correct trend of variations along the microchannel for some of the characteristics, especially when the range of temperature change near the wall is considerable. In the fully developed region, constant property solution overestimates the values of shear stress near the walls of the microchannel. In addition, the values of Nusselt numbers are different for the two solutions. Furthermore, a decrease in wall’s shear stress has been observed as a result of increasing nanoparticle size.Originality/valueThis paper reflects that how the friction factor and heat transfer vary along the microchannel in temperature dependent modeling, which is not reflected in the results of constant property approach. To the best of the authors’ knowledge, there is no similar investigation of the effect of nanofluid variable properties with Pr=5 or in annular geometry.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call