Abstract
Pre-chamber (PC) ignition is a promising lean-burn technology to improve the efficiency of spark ignition (SI) engines while achieving ultra-low NOx emissions. However, the significant effects of the excess air ratio (λ) on the PC jet performance and ignition mechanism were still not fully unraveled. The current study numerically investigated the jet characteristics and combustion behaviors of a narrow-throat PC with two rows of orifices on a passive PC engine fueled with methane. The numerical model was validated extensively by the pressure, heat release rate, and natural flame luminosity (NFL) imaging of the PC flame jet. A detailed comparison of the NFL images of the jets and the simulated flame iso-faces presented excellent matching in the flame jet penetration and propagation process. The results reveal that the λ = 0.9 case has the best jet performance, but it doesn’t lead in every jet characteristic. For instance, the jet temperature is highest under λ = 1.0, and OH concentration is most under λ = 1.1. The transition from cold jet to flame jet produces noticeable jet non-uniformity, which is reported for the first time. This observation can be remarked as a more accurate indication of the initiation of pre-chamber flame jet discharge. The asymmetrical mixture inflow from the main chamber produces asymmetrical turbulent kinetic energy (TKE) and temperature distributions; these result in different flame propagation in the PC, jet non-uniformity, and varied stages of jet discharge. The upper jets are quenched in every case because of the much higher TKE, while the lower jets don’t present quenching when the λ ranges from 0.9 to 1.3; especially, the λ = 1.1 case has the best ignition performance for its most OH radicals. The “jet ignition regime”, in which flame quenching takes place, results in highly non-uniform flame propagation and low flame propagation speed. The ultra-rich case shows more signs of jet ignition and thus exhibits worse jet performance than the lean cases. This study uncovers the mechanisms and the optimal λ value for the pre-chamber ignition of the main chamber charge, providing valuable guidance for PC design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.