Numerical Investigation of the Operating Characteristics of the Passive and Active Prechamber Jet Ignition in a Natural Gas Engine.

Abstract

Listen

Translate article

Prechamber jet ignition is a promising technology that enables stable ignition and fast combustion by combining thermal effects, chemical kinetics, and turbulent disturbance. The development and application of the prechamber ignition require a comprehensive and in-depth understanding of the operating characteristics of the prechamber ignition in the real engine working cycle. Therefore, numerical simulations are conducted to explore the operating performance of the prechamber ignition applied to a large-bore natural gas engine in this study. The differences between the passive prechamber (PPRE) and active prechamber (APRE) near the lean burn limit are compared. The results show that the jet ignition performance of the PPRE is hampered by the high residual gas coefficient and lean mixture in the prechamber under lean burn conditions. The ignition mode of the PPRE is similar to torch ignition, and the combustion process in the main chamber is mainly turbulent flame propagation. The ignition mechanism of the APRE is flame jet ignition. The main chamber combustion process presents a two-stage heat release characteristic, which can be subdivided into three phases: the initial flame development phase, the rapid combustion phase, and the late combustion phase. The heat release rate during the initial flame development phase depends on the physical and chemical properties of the prechamber jet and the mixture conditions in the main chamber. During the rapid combustion phase, the flame propagation along the radial direction of the jet largely depends on the time scale of the chemical reaction. The heat release rate depends on the coverage area of the jet, the jet residual momentum, and the turbulent flame speed. During the late combustion phase, the flame propagation is mainly affected by the turbulent flame speed. These results provide theoretical guidance for the subsequent application of prechamber ignition systems in various powertrains.