Abstract

A Kretschmann configuration‐based surface plasmon resonance sensor is proposed. The sensor is made up of calcium fluoride prism, silver, silicon, and tungsten di selenide nanolayer. The theoretical and numerical study of surface plasmon resonance sensor is analyzed by angle interrogation method with the help of MATLAB 2017b. The transfer matrix method (TMM) is the foundation for simulation and a monochromatic light of wavelength 633 nm is considered as source. In the proposed device structure, each layer is arranged in vertical format to improve the electrical and optical properties. The refractive index for analyte is considered as 1.330 to 1.335. Silver (Ag) metal is used for the generation of surface plasmons. It has good chemical properties like metallic conductivity, chemical stability, bandgap, small work function, and acts as an adhesive layer between calcium fluoride prism and silicon layer. To improve the molecular contact and absorption, the transition metal dichalcogenide nanofilm tungsten di selenide (WSe2) is applied at the top. The sensitivity of 367.4 deg RIU−1, detection accuracy of 0.4169 deg−1, quality factor of 193.58, and full‐width half maximum of 1.8985 deg are obtained optimized performance parameters of the proposed device structure.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call