Numerical study of fire resistance of stainless steel circular hollow section columns

Abstract

Stainless steel has countless desirable characteristics for a structural material. Although initially more expensive than conventional carbon steel, stainless steel structures can be competitive due to their smaller need for fire protection material and lower life-cycle cost, thus contributing to a more sustainable construction. The most common stainless steel groups used in structural applications are the austenitic, ferritic and austenitic–ferritic (also known as Duplex grades). This work presents a numerical study on the behaviour of stainless steel circular hollow section members under axial compression at elevated temperatures, with different cross-section slenderness. The numerically obtained ultimate load-bearing capacities are compared with simplified calculation formulae from Eurocode 3 for columns under fire situation. A parametric study, considering different stainless steel grades from the aforementioned groups, cross-sectional classes and slendernesses, is here presented for different elevated temperatures. The numerical analyses were performed with the finite element programme SAFIR, with material and geometric non-linear analysis considering imperfections. Comparisons between the numerical results and the Eurocode 3 rules demonstrated that a specific design approach must be developed for stainless steel columns under fire situation.