Numerical Simulations of Dome-Collapse Pyroclastic Density Currents Using faSavageHutterFOAM: Application to the 3 June 1991 Eruption of Unzen Volcano, Japan

Abstract

Pyroclastic density currents (PDCs) are one of the most dangerous but least understood phenomena of volcanic eruptions. An open-source numerical depth-averaged model of dense granular currents controlled by physical processes such as energy dissipation, basal deposition, and erosion (faSavageHutterFOAM) was applied to investigate the basal concentrated region of a dome-collapse PDC generated on June 3, 1991 at Unzen volcano (Japan) to assess the effects of the physical processes (and their interplay) on the flow dynamics and run-out area of the PDC. Numerical simulations show that energy dissipation process decreases the flow velocity and increases the basal deposition rate, which reduces the run-out distance. The simulations also reveal that erosion process during flow propagation decreases the flow velocity and increases the run-out distance. The numerical results are sensitive to the parameters of energy dissipation (dry friction coefficient μ and collisional or turbulent friction coefficient χ) and erosion (specific erosion energy eb). The results are fitted to field data for run-out distance and flow velocity when μ is between 0.01 and 0.1 with χ∼103 m-1 s-2 (or when χ is between 104 and 105 m-1 s-2 with μ∼0.2) and eb∼102 m2 s-2. The estimated value of eb suggests that re-entrainment of deposit mass played an important role in controlling the flow dynamics and run-out area of the PDC. The estimated values of μ and χ are correlated, but the estimation of these parameters might be improved by further constraints from field data. The presented results serve as a basis to make further quantitative estimations of the model parameters (μ, χ, and eb) for applying the faSavageHutterFOAM model to hazard assessments of PDCs.