Abstract
In order to analyze temperature field and stress field of Co-based alloys laser cladding, the model of Co-based alloys laser cladding with preset-powder method has been made on low carbon steel substrate. The temperature field and stress field of laser cladding process was analyzed by SYSWELD software, and Experimental verification is done. The results showed that temperature field is appear to a trailing tail of comet, favorable metallurgy bonding with 12.3% dilution was obtained by scanning velocity was 4 mm/s. and instantaneous cooling rate of molten pool with 4 mm/s and 5 mm/s are increased to 1.47 times and 2.02 times of 3 mm/s. The transverse residual stress different nodes on the surface of coatings are always tensile stress, and it is almost steady, the maximum deformation is 0.34 mm at the edge of work-piece, these are consistent with experimental results. These results provide reference and guide to obtain high quality coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.