Abstract

ABSTRACTThe high-speed motion of a seaplane involves the coupled hydrodynamic and aerodynamic effects. The suction force, pressure, free surface and motion of the seaplane model were numerically investigated to understand the characteristics of the seaplane's planing motion. The study utilized the SST-DDES turbulence model to analyse the coupled hydrodynamic and aerodynamic effects. Overset mesh method and rigid body motion were employed to simulate the high-speed and substantial motion of seaplane. The volume of fluid method (VOF) was used to capture and sharpen the interface between water and air. First, verification and validation (V&V) were performed by comparing the results with those of the towing tank experiments. Second, the air-water entrainment in calm water and free surfaces were presented, and the pressure distribution on the seaplane was analysed and discussed. Numerical simulations were performed while considering the wave parameters of different velocities, wavelengths, and wave heights. The accelerations of the fore, aft, and centre of gravity of the seaplane demonstrated the presence of the suction effect. The evolution of the air-water entrainment at the bottom of the fuselage was observed. The investigation of suction characteristics revealed that the aerodynamic force in waves plays a substantial role in influencing motions of the seaplane.HighlightsThe study of hydrodynamics and aerodynamics of seaplanes is interdisciplinary. The numerical schemes, including a SST-DDES turbulent model, overset mesh method, and volume of fluid (VOF) method, have proven to be effective and accurate for simulating the motion of the seaplane and flow field characteristics.The greater the speed and wave height, the faster is the motion of the seaplane and the greater are peak and trough values of the pitch. As the wavelength increased, the peak value of the motion decreased gradually.The accelerations of the aft, fore, and centre of gravity of the seaplane in the waves exhibited significant periodicity. The peak value of the acceleration at the aft was the largest, whereas that at the centre of gravity was mild, and the peak value of the acceleration at the centre of gravity was greater than that at the fore. The acceleration indicates that suction at the aft of the seaplane hinders the takeoff during the planing motion.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.