Abstract
Concrete consists of coarse aggregates, mortar matrix, and interfacial transition zone (ITZ) between them at the mesoscale. Considering these three phases, many numerical tests have been conducted to study the mesodamage behavior of concrete, in which a variety of numerical methods have also been adopted. These methods are mainly based on the finite element method (FEM); however, some other methods have been proven to be helpful as well. For example, the material point method (MPM) has the advantage of building a numerical model based on pixel or voxel of the image and is capable of solving large deformation problems. In view of this, MPM is introduced in this paper. Firstly, a method for establishing the numerical specimen is put forward, considering the original sample of its mesoscopic geometric character. Then, a stochastic damage constitutive model considering the heterogeneity of the concrete is proposed. Next, the numerical model and the constitutive model are incorporated into an MPM code to conduct numerical tests. The uniaxial tension and compression tests of a random‐aggregate model and a double‐aggregate specimen under uniaxial tension are then simulated numerically to validate the proposed method. Results show that the proposed method can well capture the main macroscopic mechanical behavior of concrete and the mesoscopic damage initiation and propagation. It is also found that MPM can save the time of model establishing and improve calculation efficiency. The influences of different parameters of the proposed constitutive model are also clarified through a parametric study. The proposed method can provide a useful tool for concrete numerical testing and for studying the mechanical behavior of concrete at mesoscale.
Highlights
Concrete is the most widely used construction material all over the world, and the study of its mechanical behaviors still remains an important issue in civil engineering and material science [1,2,3,4,5]
From the viewpoint at mesoscale, concrete is a typical composite material, which consists of three main phases: coarse aggregates, mortar matrix, and interfacial transition zone (ITZ) between them [5,6,7]. erefore, concrete is highly heterogeneous at the mesoscopic level, and the macroscale mechanical behaviors of concrete, which draw the attention of engineering practice, are greatly determined by its mesoscale structure
A novel numerical method based on Material point method (MPM) is proposed to study the mesodamage behavior
Summary
Concrete is the most widely used construction material all over the world, and the study of its mechanical behaviors still remains an important issue in civil engineering and material science [1,2,3,4,5]. In terms of the mesoscopic problem, due to the beneficial characteristic properties of MPM, it can build the relationship between the material point (Lagrange particles) and the pixel or voxel of the image or tomography [30,31,32] and further establish the numerical specimen, which helps to improve the efficiency of numerical models construction. Since MPM has a beneficial effect on solving large deformation problems, so far, MPM has helped researchers to study bulk metallic glass and nanofoams from the mesoscopic level [31, 32]. It is seldom adopted for concrete numerical simulation at mesoscale. A parametric study is carried out to further study the performance of the proposed method
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
