Abstract
In ductile metals one of basic mechanisms for fatigue crack growth is that based on crack-tip blunting under the maximum load and re-sharpening of the crack-tip under minimum load. In this paper, simulations of fatigue crack growth by crack-tip blunting using ANSYS finite element code are presented. This investigation focuses solely on simulation of fatigue crack growth due to crack-tip plasticity only. As such, any material damage and its fracture is not considered. Due to high plastic deformation the present simulations utilize a remeshing technique which allows applying a number of load cycles without terminating the simulation due to the error caused by excessive mesh distortion. The simulations were conducted using a center cracked specimen under various loading conditions including different load ranges and load ratios R = −1, 0 and 0.333. It is shown that fatigue crack growth (FCG) slows down with number of cycles towards a steady state value. The simulated FCG data for constant amplitude loading follow the Paris power law relationship and also indicate a typical R-ratio dependence. It can be noted that for all load cases with load ratios R > 0 no crack closure in the vicinity of the crack-tip wake was observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have