Abstract
The paper studies the localization of plastic deformation and fracture in a material with a porous coating. A dynamic boundary value problem in the plane strain formulation is solved. The numerical simulation is performed by the finite difference method. The composite structure corresponds to the experimentally observed one and is specified explicitly in the calculation. A generation procedure of the initial finite-difference grid is developed to describe the coating structure with adjustable porosity and geometry of the substrate-coating interface. Constitutive equations for the steel substrate include an elastic-plastic model of an isotropically hardening material. The ceramic coating is described by a brittle fracture model on the basis of the Huber criterion which accounts for crack nucleation in triaxial tension zones. It is shown that the specific character of deformation and fracture of the studied composite results from the presence of local tensile regions in the vicinity of pores and along the coating-substrate interface, in both tension and compression of the coated material. The interrelation between inhomogeneous plastic flow in the steel substrate and crack propagation in the coating is studied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.