Abstract

Magnetic matrices are the core components of HGMS systems. In this study, the induced magnetic field distribution characteristics of ellipse magnetic matrices are investigated via numerical simulation. Besides, the effects of magnetic matrices structure parameters and magnetic field distribution characteristics on the cumulative adsorption behavior of magnetic particles are also discussed. First, the numerical simulation results indicated that compared with the simulation results of a single magnetic matrix, the multi-matrix composite system simulation results demonstrate that an interaction of the induced magnetic fields generated by the superposition of magnetic fields is enhanced with the increase in the long axis size or the decrease in the gap between the matrices, heightening the magnetic induction but leading to the magnetic field gradient and magnetic field forces to significantly decrease near the surface of the matrix. And the rapid reduction of the magnetic field forces around the single matrix leads to a reduction in the range of action. However, to a certain extent, the interaction of the induced magnetic fields also will make the scope of the magnetic field force expand with the decrease in the gap between the matrices. The magnetic cumulative adsorption tests prove that it is feasible to infer the adsorption behavior of magnetic particles through the numerical simulation and theoretical calculations. The adsorption morphology of magnetic particles on the surface of magnetic matrices show that the repulsive region of magnetic particles is perpendicular to the direction of magnetic field, and the adsorption region of magnetic particles is parallel to the direction of magnetic field and with the increase of the size of magnetic matrices, the effective adsorption area of magnetic particles on the surface of magnetic matrices decreases gradually. Besides, with the increase of the horizontal gap between adjacent magnetic matrices, the adsorption thickness of magnetic particles on the surface of magnetic matrices decreases. Moreover, with the expansion of the horizontal gap between the adjacent magnetic matrices, the adsorption amount of the magnetic particles gradually decreases due to the decrease of the adsorption area and fill rate. The adsorption amount of magnetic particles will decrease as the long axis size increases when the fill rate of the magnetic matrices is similar.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call