Numerical modeling of heat transfer behavior for two-phase flow in a nozzle considering phase change

Abstract

The heat transfer and phase change of alumina particles in the gas-particle flow of the nozzle plays an important role in solid rocket motors (SRM) due to the coupling between the heat transfer and two-phase flow. However, it lacks precise modeling of the heat transfer behaviors of condensed particles in the nozzle, especially the phase change effect. In this article, we determine that the Drake model has the highest accuracy in calculating the convective heat flux between two phases, and propose a correlation to obtain radiative heat flux between the particle and walls. Then, a one-dimensional two-phase non-equilibrium model is established to consider the effects of heat transfer and solidification of particles on the two-phase flow in the nozzle. The results show that considering the phase change of particle improves the outlet thrust of the nozzle, but such increment decreases with the gas inlet temperature. When the supercooling phenomenon is considered, the nozzle thrust is reduced by 1.14% compared with that considering no supercooling. As the particle size increases, the outlet temperature of the particle phase rises and can even surpass the solidification temperature of particles and the velocity of the particle phase decreases significantly.