Abstract
In a natural circulation boiling water reactor (BWR), the core power varies in both axial and radial directions inside the reactor core. The variation along the axial direction is more or less constant throughout the reactor; however, there exists variation of reactor power in the radial direction. The channels located at the periphery have low power compared to the center of the core and are equipped with orifices at their inlet. This creates nonuniformity in the radial direction in the core. This study has been performed in order to understand the effect of this radial variation of power on the stability characteristics of the reactor. Four channels of a pressure tube type natural circulation BWR have been considered. The reactor has been modeled using RELAP5/MOD3.2. Before using the model, it was first benchmarked with experimental measurements and then the characteristics of both low power and high power oscillations, respectively, known as type-I and type-II instability, have been investigated. It was observed that the type-I instability shows slight destabilizing effect of increase in power variation among different channels. However, in the case of type-II instability, it was found out that the oscillations get damped with an increase in power variation among the channels. A similar effect was found for the presence of orifices at the inlet in different channels. However, the increase in number of orificed channels showed stabilizing effect for both type-I and type-II instabilities.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call