Abstract
AbstractDirect numerical simulations were performed to investigate wavepackets in a sharp cone boundary layer at Mach 6. In order to understand the natural transition process in hypersonic cone boundary layers, the flow was forced by a short-duration (localized) pulse. The pulse disturbance developed into a three-dimensional wavepacket, which consisted of a wide range of disturbance frequencies and wavenumbers. First, the linear development of the wavepacket was studied by forcing the flow with a low-amplitude pulse (0.001 % of the free-stream velocity). The dominant waves within the resulting wavepacket were identified as the second-mode axisymmetric disturbance waves. In addition, weaker first-mode oblique disturbance waves were also observed on the lateral sides of the wavepacket. In order to investigate the nonlinear transition regime, large-amplitude pulse disturbances (0.5 % of the free-stream velocity) were introduced. The response of the flow to the large-amplitude pulse disturbances indicated the presence of a fundamental resonance mechanism. Lower secondary peaks in the disturbance wave spectrum were identified at approximately half the frequency of the high-amplitude frequency band, suggesting the possibility of a subharmonic resonance mechanism. However, the spectrum also indicated that the fundamental resonance was much stronger than the subharmonic resonance. A secondary stability investigation using controlled disturbances confirmed that fundamental resonance is indeed a dominant mechanism compared to subharmonic resonance. Furthermore, strong peaks in the disturbance wave spectrum were also observed for low-azimuthal-wavenumber second-mode oblique waves, hinting at a possible oblique breakdown mechanism. Thus, the wavepacket simulations indicate that the second-mode fundamental resonance and oblique breakdown mechanisms are the strongest for the investigated flow. Hence, both mechanisms are likely to be relevant in the natural transition process for a cone boundary layer at Mach 6.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.