Abstract
The energy harvesting performance of a hydrokinetic turbine in a confined channel has been investigated through numerical simulations. It consists of a two-bladed vertical-axis turbine with a NACA0015 profile. Fluid dynamics are reproduced by a 2D numerical model solving the unsteady RANS equations through a finite volume approach in OpenFOAM-v6 . Following a numerical sensitivity analysis, the baseline model has been validated with respect to reference data for an unconfined turbine with similar design. The model has then been employed for assessing the influence of the main design parameters – namely blade-channel gap ε 0 , solidity σ and tip-speed ratio λ – on the performance of the turbine. First, a parametric study on the plane λ × σ revealed that best performance is obtained at high solidity and low tip-speed ratios. In a range of solidities from 0.06 up to 0.48 , the optimal value of tip-speed ratio – which is considerably higher when compared with unconfined turbines – is precisely identified. Finally, the effects of the blade-channel gap ε 0 on the performance of the turbine has been investigated as well. It has been found that ε 0 should be set as small as possible in order to maximise energy harvesting. Moreover, numerical results allowed for estimating a limit value of ε 0 > 9 over which the performance of a turbine operating in a confined channel should match that of an unconfined turbine.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
