Abstract
Nowadays, polymer-based nanocomposites widely used in biocompatible restorative materials and medical equipment and polymer-based nanocomposites are the most important of them. One of the most useful biocompatible polymers in this field is polymethyl methacrylate (PMMA). In this research, the experimental and numerical analysis of the fracture behaviors of PMMA nanocomposites that are reinforced with hydroxyapatite (HA) nanoparticles are investigated under pure mode I, pure mode II and mixed-mode (I/II) loading. For this purpose, notched semi-circular bend (SCB) specimens containing various Wt. % of HA nanoparticles and different notch angles were fabricated. Then, the mechanical properties of the specimens and the fracture toughness of the notched specimens were investigated. To evaluate the accuracy of nanomaterial distribution, scanning electron microscopy (SEM) images are analyzed and it was observed that at Wt. % of more than 1.5%, specimens with more cumulative masses of hydroxyapatite nanoparticles have more strength reduction. Also, to investigate the fracture behaviors of the produced specimens, the failure criteria of maximum tangential stress (MTS) and generalized maximum tangential stress (GMTS) were evaluated and it was observed that the GMTS criterion is more in line with the experimental results. In addition, the results showed that by increasing the Wt. % of HA nanoparticles from zero to 1% mass, the KIC value increased compared to the pure PMMA, whereas, by increasing this value to 1.5% mass, the fracture toughness decreased. Finally, the fracture initiation and propagation are evaluated using FEM and XFEM numerical methods and the values of stress intensity factors and crack growth path are predicted and compared with experimental values. The obtained numerical results are in good agreement with the experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.