Abstract
Laser aided additive manufacturing (LAAM), a blown powder additive manufacturing process, can be widely adopted for surface modification, repair and 3D printing. A robust numerical model was developed to simulate convective fluid flow and balancing of surface tension forces at the air-fluid interface to predict melt-pool free surface curvature and solidified clad dimensions. The free surface physical interface was calculated using the Arbitrary Lagrangian Eulerian (ALE) moving mesh approach. Powder deposition efficiency was considered by activating mesh normal velocity at melted regions based on localized powder mass flux intensity from the discrete coaxial powder nozzles. The heat flux equation used for representing the laser heat source considered attenuation effect from the interaction between the powder jets and laser as well as heat sink effects of un-melted powder particles entering the melt-pool. The predicted thermal gradient directions agree well with grain growth orientations obtained from electron backscatter diffraction (ESBD) analysis in three different cross-sectional orientations. Experimental validation of clad width, height and melt-pool depth shows a maximum error of 10% for a wide range of processing parameters which consider the effects of varying laser power, laser scanning speed and powder feeding rate.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
