Abstract
Photovoltaic thermal (PVT) collectors that can achieve maximum efficiency from solar irradiation can be critical concepts for meeting energy demand in residential applications. Even though there is much research on increasing heat transfer, multifunctional designs that provide homogeneous results are limited. This study explores the production of electricity and hot air from a novel design of a PVT. A new perforated copper plate design has been proposed to achieve maximum efficiency by providing homogeneous cooling in the PVT. Firstly, numerical analysis of this design was performed using Ansys Fluent software, then tested experimentally. The highest and average electrical and thermal efficiency of PVT are obtained as 17.62 %, 15.63 %, and 76.75 %, 43.68 %. In experiments conducted under winter conditions, the maximum temperature value in the PVT was measured as 41.54 °C. Moreover, the payback period of the PVT system was calculated as 6.1 years. The proposed PVT collector can be used as a new model for integrating solar energy in buildings with almost zero energy. Considering the eco-design, this PVT design can contribute net positive carbon, ecological footprint, and green manufacturing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.