Abstract
ABSTRACT Semi-coke is the coproduct of low-rank coal in the preparation of oil and gas, but the current utilization rate of fine-powder semi-coke is low, which limits the development of the low-rank coal pyrolysis industry. This paper uses the numerical simulation method to study the co-combustion characteristics of a large proportion of bituminous coal mixed with semi-coke in a swirl burner. The results show that, in the primary combustion region, with the increase of the blend ratio of semi-coke, the flue gas temperature and NO concentration are lower, and the O2 concentration increase is higher. In the over-fired air (OFA) nozzle area, with the increase of the blend ratio of semi-coke, the flue gas temperature and NO concentration are higher, and O2 concentration is lower. In addition, with the increase of the blend ratio of semi-coke, the main combustion position of the fuel is transferred to the vicinity of the OFA nozzle area, which weakens the degree of air-staging combustion of the furnace. The synergistic effect of co-combustion of semi-coke and bituminous coal helps to reduce the NO concentration at the furnace outlet and improve the combustion efficiency. By comprehensive considering the stable operation of the boiler, burnout rate, and NO emission concentration, the recommended blend ratio of semi-coke should not exceed 60%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
