Numerical Analysis of Using R449A Refrigerant Alternative to R404A in Cooling Systems: 3E-Analysis (Energetic, Exergetic, and Environmental)

Abstract

The direct impact of refrigerants on the environment is largely dependent on the magnitude of global warming potential (GWP) values. In this regard, fluids with low GWP are very important for the environment. Commercial refrigeration accounts for about a third of the world's HFC use. R404A is a derived HFC near an azeotropic mixture. The refrigerant of R404A is widely used in commercial refrigeration systems, especially in supermarkets. As a result of the use of R404A in cooling systems with high GWP, both indirect and direct negative effects on the environment increase. In this study, the energy, exergy, and Life Cycle Climate Performance (LCCP) of R449A, which has a lower GWP value, which can be an alternative to R404A refrigerant, were investigated theoretically. Different evaporator temperatures (-30oC to -5oC) and a condenser temperature (30oC) were used in the analysis. According to the results obtained, while the mass flow rate of R449A is approximately 13% lower than that of R404A, its exergy efficiency is 5% higher. R449A was found to be approximately 5% lower than R404A in LCCP analysis.