Numerical Analysis of the Effect of Ethanol-Gasoline Blends on a Single-Cylinder Spark-Ignition Engine Performance and Emissions

Abstract

Listen

Translate article

— With the rapid increase in the number of vehicles fueled by gasoline plying on the roads, there has been a rising need in the search for alternative fuels, which are more environmental friendly in order to reduce the amount of vehicular exhaust emissions. This can be achieved by using blended mixtures of gasoline with alcoholic fuels among which, ethanol is found to be most suitable due to its easy availability, low costs, safety and low impact on the engine performance. This study aims to investigate the performance of a single-cylinder, four-stroke spark-ignition engine using different ethanol-gasoline blends, namely E0, E10, E20 and E30. The engine's torque, brake power, brake thermal efficiency, brake-specific fuel consumption, and exhaust emissions were analysed using numerical simulation. Results revealed that raising the proportion of ethanol in the fuel mixture resulted in reduced brake power and torque upto 16% as a result of decrease in calorific value of the mixture. The engine's brake thermal efficiency decreased by upto 3% while the brake-specific fuel consumption increased upto 12% with increase in ethanol concentration. Exhaust emissions, including NOx and HC, were found to be influenced by engine speed, with NOx emissions increasing and HC emissions decreasing as speed increased. The study also revealed that increasing ethanol concentration in the fuel resulted in reduced engine exhaust emissions by upto 47% and 10% for NOX and HC emissions respectively. The study concluded that among all the blends used, optimum performance was obtained for E30 blend with reduction in exhaust emissions but at the expense of slight reduction in engine performance.