Abstract
In this paper two novel power dividers based on half mode substrate integrated waveguide (HMSIW) and composite right/left handed transmission lines CRLH-TL cell are proposed and compared to a conventional SIW one. Simulations of the three power dividers are presented over a frequency band from 1.8 GHz to 3.2 GHz. The SIW technology holds advantages of high Q-factor and low return loss but it suffers from the big size in low frequency band, So to realize a nearly 50% reduction in size with keeping the good performances of the SIW technology, half mode substrate integrated wave guide HMSIW origins from SIW has been used, A novel structure of a power divider based on HMSIW technology was designed with a low cost FR4 substrate and compared to a conventional power divider based on SIW technology. The designs are printed on a Roger RT/duroid 6010 and performed within an HFSS environment based on the finite element method (FEM). Good performances were achieved with our proposed power dividers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.