Novel aqueous spongy foams made of three-dimensionally dispersed wood-fiber: entrapment and stabilization with NFC/MFC within capillary foams

Abstract

This article describes the preparation of novel aqueous spongy foams that are composed of three-dimensionally distributed wood-fiber networks stabilized with nanofibrillate cellulose (NFC) and/or microfibrillated cellulose (MFC). The free standing aqueous spongy foams were prepared with the entrapment of NFC and/or MFC—stabilized air-in-water (A/W) capillary foams using “gel trapping technique”. The stability of spongy foams could be controlled by manipulating the volume fraction of NFC and/or MFC and a secondary liquid immiscible with the continuous phase of the NFC and/or MFC suspension. Possible morphology and mechanical distribution of NFC and/or MFC within spongy foams were verified with optical microscope, SEM, and functional load-bearing method. Owing to three-dimensionally dispersed wood-fiber structure, ultra-lightweight (0.01–0.06 g/cm3), high porosity (>90%), and microporous (10–80 μm), the NFC and/or MFC reinforced spongy foams, improved compressional strength-vertical direction obviously, from 0.0 to more than 13.78 kPa.