Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance

Abstract

Novel alginate-based binders containing either catechol (d-Alg) or sulfonate (s-Alg) functional groups were developed and characterized to improve the capacity decay performance and better stability of Li-ion batteries. The electrochemical performance of silicon–graphite (Si/Gr) anode with alginate-based binders were compared to the commonly used CMC/SBR binder. The active material in the anodes was the ball-milled Si/Gr (20:80 wt%) powder mixture. A comprehensive electrochemical study was carried out through rate capability test, cycle test, differential capacity analysis (dQ/dV), and electrochemical impedance spectroscopy (EIS). The functionalized s-Alg binder showed the lowest electrolyte uptake (11.5%) and the highest tensile strength (97 MPa). Anodes with s-Alg exhibited high initial capacity (1250 mAh g−1) and improved decay performance (580 mAh g−1 at 0.2 C), by ~ 65% higher compared to CMC/SBR binder. The influence of pH value of s-Alg binder preparation showed that anodes prepared at pH 3 of s-Alg exhibit better performance, reaching 800 and 750 mAh g−1 at 0.1 and 0.2 C, respectively, due to the stronger bonding formation and compactness of anode layer which providing low charge transfer and solid electrolyte interface resistance.Graphical abstract