Notice of Violation of IEEE Publication Principles - On-line condition monitoring and diagnostics of power distribution equipment

Abstract

Notice of Violation of IEEE Publication Principles<br><br>"On-line Condition Monitoring and Diagnostics of Power Distribution Equipment,"<br>by Yong-Sung Choi; Ju-Ho Yun; Hyang-Kon Kim; Chung-Seog Choi; Kyung-Sup Lee,<br>in the Proceedings of the 2008 International Conference on Condition Monitoring and Diagnosis, 21-24 April 2008, pp 692-695<br><br>After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles.<br><br>This paper is a near duplication of the original text from the papers cited below. The original text was copied without attribution and without permission.<br><br>Due to the nature of this violation, reasonable effort should be made to remove all past references to this paper, and future references should be made to the following articles:<br><br>"Online Condition Monitoring and Diagnostics of Power Distribution Equipment,"<br>by Livshitz, A., Chudnovsky, B.H., Bukengolts, B,<br>in the Proceedings of the 2004 Power Systems Conference and Exposition, 10-13 Oct. 2004, vol. 2, pp. 646 - 653 <br/> Continuous on-line temperature monitoring provides the means to evaluate current condition of equipment and detect abnormality. It allows corrective measures to be taken to prevent upcoming failure. Continuous temperature monitoring and event recording provides information on the energized equipment’s respond to normal and emergency conditions. On-line temperature monitoring helps to coordinate equipment specifications and ratings, determine the real limits of the monitored equipment and optimize facility operations. Using wireless technique eliminates any need for special cables and wires with lower installation costs if compared to other types of online condition monitoring equipment. In addition, wireless temperature monitoring works well under difficult conditions in strategically important locations. Wireless technology for on-line condition monitoring of energized equipment is applicable both as standalone system and with an interface with power quality monitoring system. The paper presents the results of wireless temperature monitoring of switchgear at a power plant over a two-year period.