Abstract
In order to investigate the quench behavior of conduction cooled MgB <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> magnets, a 100 mm inner bore diameter, 0.84 T at 20 K magnet has been built and tested. The test magnet consists of 4 double pancakes wound with the MgB <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> /Ni -Cu-Fe tape produced by Columbus. Each coil is cooled by means of a 2 mm thick copper disk placed during winding at the middle of the double pancake; after winding the double pancakes have been separately epoxy impregnated. Several experiments have been performed inducing a local transition in the coil by means of a controlled heater placed on the double pancake surface. The propagation of the normal zone has been monitored by means of 8 voltage probes positioned along the tape during coil manufacturing. Each voltage probe detects the voltage drop across a tape length of 30 mm. The experiments have been performed at different temperatures while keeping the magnet current constant during quench. In the paper we report an analysis of the quench propagation velocity measurements and a numerical investigation of the thermal and electrical behavior of the magnet.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
