Abstract
Hexagonal graphitic boron nitride (h-BN) composites show excellent corrosion and thermal shock resistance, good mechanical tolerance and machinability, especially Si3N4–BN and Sialon–BN composites; they have already been used as break rings for horizontal continuous casting of steel. However, the strength of the conventionally processed BN composites were remarkably degraded by the addition of BN due to the poor densification behavior and the existence of large BN flakes or agglomerates of BN flakes that acted as fracture flaws. This means that BN dispersoids with fine particle size and homogeneous distribution are the key factors to obtain high strength composites. By in situ process, such microstructural features can be realized. In this work, by using the proposed in situ reactions, synthesis, microstructures and properties of various in situ nonoxide-boron nitride (Nobn) composites including SiC–BN, Si3N4–BN, AlN–BN, Sialon–BN and Alon–BN composites were investigated. For some Nobn composite systems, due to the large volume expansion during the reaction processes, near-net shape sintering can be realized. For example, the sintering shrinkage of AlN-30 vol.% BN was 3.1% and that of Alon-21 vol.% BN was 4.2%. This will be an advantage for the fabrication of large and complicated products. # 2002 Elsevier Science Ltd. All rights reserved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.