Abstract
Even though the offshore wind industry’s growth potential is immense, the offshore wind industry is still suffering from problems, such as the large initial capital requirements. Many factors are involved, and among these, the extra costs incurred by the conservative design of offshore wind energy converters can be quickly addressed at the design stage by accounting for the nonlinear destructive interaction between wind and wave loads. Even when waves approach offshore wind energy converters collinearly with the wind, waves and wind do not always make the offshore wind energy converter’s substructure deformed. These environmental loads can intermittently exert a force of resistance against deformation due to the nonlinear destructive interaction between wind and wave loads. Hence, the nonlinear destructive interaction between wave and wind loads deserves much more attention. Otherwise, a very conservative design of offshore wind energy converters will hamper the offshore wind energy industry’s development, which is already suffering from enormous initial capital expenditures. In this rationale, this study numerically simulates a 5 MW offshore wind energy converter’s structural behavior subject to wind and random waves using the dynamic structural model developed to examine the nonlinear destructive interaction between wind and wave loads. Numerical results show that the randomly fluctuating water surface as the wind blows would restrict the offshore wind energy converter’s substructure’s deflection. Nonuniform growth of the atmospheric boundary layer due to the wavy motions at the water surface as the wind blows results in a series of hairpin vortices, which lead to the development of a large eddy out of hairpin vortices swirling in the direction opposite to the incoming wind near the atmospheric boundary layer. As a result, the vertical profile of the longitudinal wind velocity is modified; the subsequent energy loss drastically weakens the wind velocity, which consequently leads to the smaller deflection of the substructure of the offshore wind energy converter by 50% when compared with that in the case of wind with gusts over a calm sea.
Highlights
Power generation via offshore wind energy is expected to grow to 75 GW by 2020 [1,2]
The aero-elastic and hydro-elastic analyses that explain the interaction of the wind and wave forces with the offshore wind energy converter were implemented using the beam element method with a shape function of the first eigenmode in an effort to increase the accuracy of the numerical simulation
Despite its unlimited growth potential, the offshore wind industry is still suffering from problems, such as the large initial capital requirements
Summary
Power generation via offshore wind energy is expected to grow to 75 GW by 2020 [1,2]. Compared to the linear superposition method, the integrated dynamic model has been reported to provide smaller forces on the structural member of an offshore wind energy converter and a lower moment This phenomenon can result from the destructive interaction among the various plausible interactions between wind and wave loads. In the offshore oil industry, the underlying idea of the slender and flexible compliant structures that utilize the restoring force that occurs over the course of deflection as a resistance force can be traced back to aerodynamic and hydrodynamic damping [6] In this rationale, this study intends to quantitatively evaluate the nonlinear destructive interaction between wind and wave loads acting on the substructure of the offshore wind energy converter, which is a crucial step towards the converter’s optimal design by removing the redundant rigidity from the support structure. The aero- and hydro-elastic analyses that explain the interaction of wind and waves with the substructure of the offshore wind energy converter were implemented using the beam element method
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.