Nonlinear analysis of adhesively bonded tubular single-lap joints for composites in torsion

Abstract

The nonlinear analysis of tubular single-lap adhesive joints with composite adherends was performed by incorporating the nonlinear behavior of the adhesive into the analysis. For this purpose, the stress and strain in the laminated composite tube were first calculated under a general loading scheme, and then the iterative solution of the joints was derived by including the nonlinear properties of the adhesive. The stress distributions in the adhesive were investigated for different types of composite adherends and compared with the results of the linear analysis. The effect of the bonding length on torque transmission capability was also taken into consideration. The results indicate that the nonlinear analysis relieves the stress concentration at the edge of the joint, resulting in a more accurate prediction of joint strength.