Abstract
The influence of a natural terpene resin, poly(α-pinene) (PαP), on the nonisothermal crystallization process of isotactic polypropylene (iPP) was investigated. The solidification process strongly depends on cooling rate, composition, and miscibility of the system. For the blends containing PαP up to 30 wt %, the overall nonisothermal crystallization rate is depressed with respect to plain iPP. This is probably the result of the diluting effect of the polyterpene because the two components are miscible. The 50/50 blend presents, instead, two amorphous phases: an iPP-rich phase and a PαP-rich phase. For this composition, solidification starts at temperatures higher than those for plain iPP and blends with lower PαP content, given that the diluting effect of PαP in the iPP-rich phase is counterweighted by an increased number of nuclei that originate from the polyterpene-rich phase domains. PαP also influences the morphology of iPP spherulites, which are spherical in plain iPP and become more irregular with increasing PαP content. The number and dimension of iPP spherulites depend on blend composition and miscibility of the components. Moreover, the nonisothermal crystallization kinetics of iPP/PαP blends was analyzed with the Ozawa equation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 358–367, 2001
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
