Non-negligible emissions of black carbon from non-road construction equipment based on real-world measurements in China

Abstract

Non-road construction equipment (NRCE) has become a vital contributor to urban air pollutants with the rapid urbanization in China. Black carbon (BC), as a key pollutant emitted from NRCE (mainly diesel-fueled), has attracted considerable concerns due to adverse impacts on climate change, visibility, and human health. However, the understanding of its emissions is still unclear based on limited research results. In this study, we conducted real-world measurements on BC emissions from 12 excavators and 9 loaders to characterize the variation and quantify fuel-based emission factors (EFs) by using a synchronous platform based on PEMS (SP-PEMS). We analyzed the impacts of key factors (operation mode, emission standard, and engine rated power) on BC emission comprehensively. High BC emission in working mode may be mainly owing to the increase of fuel consumption and the deterioration of air-fuel ratio. With more stringent emission standards, BC EFs of all tested NRCE present significant decreasing trends. Interestingly, NRCE with high rated power generally exhibits lower BC emissions. Through comparison, we find BC EFs in this study are generally higher than elemental carbon (EC) EFs reported in previous studies, which will lead BC emissions from NRCE to be underestimated while EC EFs are used instead of BC EFs. Furthermore, BC EFs of NRCE with Stage III are significantly higher (1–3 orders of magnitude) than those of on-road diesel trucks with the current mainstream emission standards of China IV and China V, which reinforces the urgency and importance of controlling BC emissions from NRCE in China. Finally, we recommend BC EFs of excavators and loaders under different emission standards and operation modes, and which preliminarily fills the gap in localized BC EFs of typical NRCE to relieve the urgent needs for emission inventory calculation.