Abstract
The effect of biaxial compressive loading on hollow steel box column (HSBC) and concrete-filled steel box column (CFSBC) sections wrapped with low-modulus carbon-fibre-reinforced polymer (CFRP) was studied. The CFSBC and HSBC sections were simulated using Abaqus finite-element software and validated using available experimental data. Biaxial compressive loading was considered for different eccentricities (i.e. eccentricity to depth ratio (e/D) ratio of zero to 0.32). The results indicated that, for CFRP-wrapped HSBCs at low eccentricity (e/D = 0.08), compact and non-compact sections were effective at carrying higher load, while a slender section was effective for concentric loads. For the CFRP-wrapped CFSBCs, compact and non-compact sections were effective for all the eccentric loads (e/D = 0–0.32). It was also found that the low-modulus CFRP layer wrapping the CFSBC sections had no significant effect on strength. An empirical relationship was developed based on trend analysis, which gives the load-carrying capacity of any section. For the CFSBC sections, axial compression–uniaxial moment (P–M) interaction curves are presented to validate the simulation results under biaxial loading.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have