Abstract
Polypropylene(PP)/nanoclay composites samples have been fabricated by melt compounding the PP pellets with nanoclay masterbatch (i.e. 50 wt% of nanoclay) using a mini extruder. The effect of three loadings of nanoclay (i.e. 5, 10, and 15 wt%) on the morphology, non-isothermal crystallization, and viscoelastic behavior of the PP/nanoclay composites were investigated. All the nanocomposites samples were characterized by using Scanning Electron Microscope (SEM), Differential Scanning Calorimetry (DSC), and an oscillatory rheometer. The SEM results showed that the distribution of nanoclay in the PP was relatively good at all level of loadings. The DSC analysis results showed that the nanoclay has dramatically enhanced the crystallization temperature, from 117°C (for neat PP) to 127-129°C (for nanocomposites). Additionally, the frequency sweep test results exhibited that the presence of nanoclay increased the viscoelastic behavior of the PP matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.