Abstract

The production of fuel hydrocarbons from CO2-neutral raw materials is a promising task at present. The thermal dissolution of biochar obtained by the method of hydrothermal carbonization of sawdust was studied. The dissolution of biochar in tetralin (hydrogen donor solvent) was studied at different temperatures (350–450 °C) and with two types of dilution of the mixture with tetralin: 1/3 and 1/4. The process proceeded without a catalyst. It was found that the samples subjected to thermal dissolution at temperatures of 425–450 °C had the highest conversion and yield of liquid products. The reaction temperature also had a significant effect on the composition of liquid products. It was found that an increase in the reaction temperature led to a significant increase in benzenes, both in the direct and in the hexane fraction. A benzene yield of more than 50% was observed for both fractions at a temperature of 450 °C. It was also suggested that the possible positive effect of abietates on the homogenization of the reaction mixture contributed to high conversion in the process. The biochar/tetralin ratio effects the yield and composition of the liquid products as well. An increase in the tetralin concentration in the mixture during thermal dissolution led to an increase in the conversion and yield of hydrocarbon fractions for fuel purposes. This is undoubtedly due to the large amount of elemental hydrogen involved in the hydrogenation of the reaction mixture.

Highlights

  • Biomass is currently considered as a renewable raw material for the production of heat and electric energy [1]

  • The purpose of this work was to study the features of obtaining the liquid products of the thermal dissolution of biochar, obtained from sawdust, by the method of hydrothermal carbonization

  • Biochar obtained from sawdust by the method of hydrothermal carbonization was used

Read more

Summary

Introduction

Biomass is currently considered as a renewable raw material for the production of heat and electric energy [1]. Around the world, there is a noticeable decline in interest in coal chemistry as a science that ensures the development and practical application of processes for converting coal into valuable chemical products, in particular, into motor fuels. The main direction of the development of technologies for the production of synthetic motor fuels is the use of renewable biomass resources, of various origins, as a raw material base. A delay in the development and implementation of biotechnology can lead to the degradation of a number of industrial sectors (including coal chemistry), since their spread to world markets will not be possible without the use of biotechnologies

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call