Noise influenced elastic cantilever dynamics with nonlinear tip interaction forces

Abstract

In this work, the authors study the influence of noise on the dynamics of base-excited elastic cantilever structures at the macroscale and microscale by using experimental, numerical, and analytical means. The macroscale system is a base excited cantilever structure whose tip experiences nonlinear interaction forces. These interaction forces are constructed to be similar in form to tip interaction forces in tapping mode atomic force microscopy (AFM). The macroscale system is used to study nonlinear phenomena and apply the associated findings to the chosen AFM application. In the macroscale experiments, the tip of the cantilever structure experiences long-range attractive and short-range repulsive forces. There is a small magnet attached to the tip, and this magnet is attracted by another one mounted to a high-resolution translatory stage. The magnet fixed to the stage is covered by a compliant material that is periodically impacted by the cantilever’s tip. Building on their earlier work, wherein the authors showed that period-doubling bifurcations associated with near-grazing impacts occur during off-resonance base excitations of macroscale and microscale cantilevers, in the present work, the authors focus on studying the influence of Gaussian white noise when it is included as an addition to a deterministic base excitation input. The repulsive forces are modeled as Derjaguin–Muller–Toporov (DMT) contact forces in both the macroscale and microscale systems, and the attractive forces are modeled as van der Waals attractive forces in the microscale system and magnetic attractive forces in the macroscale system. A reduced-order model, based on a single mode approximation is used to numerically study the response for a combined deterministic and random base excitation. It is experimentally and numerically found that the addition of white Gaussian noise to a harmonic base excitation facilitates contact between the tip and the sample, when there was previously no contact with only the harmonic input, and results in a response that is nominally close to a period-doubled orbit. The qualitative change observed with the addition of noise is associated with near-grazing impacts between the tip and the sample. The numerical and experimental results further motivate the formulation of a general analytical framework, in which the Fokker–Planck equation is derived for the cantilever-impactor system. After making a set of approximations, the moment evolution equations are derived from the Fokker–Planck equation and numerically solved. The resulting findings support the experimental results and demonstrate that noise can be added to the input to facilitate contact between the cantilever’s tip and the surface, when there was previously no contact with only a harmonic input. The effects of Gaussian white noise are numerically studied for a tapping mode AFM application, and it is shown that contact between the tip and the sample can be realized by adding noise of an appropriate level to a harmonic excitation.