Abstract
The nitriding behavior of austenitic stainless steels (AISI 304 and 316) was studied by different cold work degree (0% (after heat treated), 10%, 20%, 30%, and 40%) before nitride processing. The microstructure, layer thickness, hardness, and chemical microcomposition were evaluated employing optical microscopy, Vickers hardness, and scanning electron microscopy techniques (WDS microanalysis). The initial cold work (previous plastic deformations) in both AISI 304 and 306 austenitic stainless steels does not show special influence in all applied nitriding kinetics (in layer thicknesses). The nitriding processes have formed two layers, one external layer formed by expanded austenite with high nitrogen content, followed by another thinner layer just below formed by expanded austenite with a high presence of carbon (back diffusion). An enhanced diffusion can be observed on AISI 304 steel comparing with AISI 316 steel (a nitrided layer thicker can be noticed in the AISI 304 steel). The mechanical strength of both steels after nitriding processes reveals significant hardness values, almost 1100 HV, on the nitrided layers.
Highlights
The austenitic stainless steels are plenty utilized in chemical processes equipment in pharmaceutical, foodstuff, textile, petroleum, and cellulose industries, where these components are exposed at aggressive ambient conditions and low temperatures
The austenitic stainless steels, despite the elevated corrosion resistance, have low hardness that can only be partially improved by cold deformation reducing its application in components submitted to severe wear conditions [2,3,4,5]
The austenitic stainless steels have substantial work hardening after cold work processing
Summary
The austenitic stainless steels are plenty utilized in chemical processes equipment in pharmaceutical, foodstuff, textile, petroleum, and cellulose industries, where these components are exposed at aggressive ambient conditions and low temperatures. These steels are employed in orthopedic implant due to its biocompatibility [1]. The austenitic stainless steels, despite the elevated corrosion resistance, have low hardness that can only be partially improved by cold deformation reducing its application in components submitted to severe wear conditions [2,3,4,5]. The nitride process, independent of the method, increases the superficial hardness of austenitic stainless steels and promotes higher wear resistance
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
