Next Generation High Power Electronic Modules Based on Embedded Power Semiconductors

Abstract

The spectrum of conventional power electronics packaging reaches from SMD packages for power chips to large power modules. In most of these packages the power semiconductors are connected by bond wires, resulting in large resistances and parasitic inductances. Power chip packages have to carry semiconductors with increasing current densities. Conventional wire bonds are limiting their performance. Today's power modules are based on DCB (Direct Copper bonded) ceramic substrates. IGBT switches are mounted onto the ceramic and their top side contacts are connected by thick Al wires. This allows one wiring layer only and makes an integration of driver chips very difficult. Additionally bond wires result in a high stray inductance which limits the switching frequency. Especially for the use of ultra-fast switching semiconductors, like SiC and GaN, it is very difficult to realize low inductive packages. The embedding of chips offers a solution for many of the problems in power chip packages and power modules. While chip embedding was an academic exercise a decade ago, it is now an industrial solution. A huge advantage of packaging using PCB technology is the cost-effective processing on large panel. Furthermore embedded packages and modules allow either double-side cooling or 3D assembly of components like capacitors, gate drivers or controllers. The advanced results of research projects will be discussed in the paper. An ultra-low inductance power module with SiC switches at 20 A / 600 V has been realized and characterized. The DC link inductance of the module was 0,8 nH only. These results sparked a huge interest in currently starting follow up projects creating package for fast switches. In a further project power modules for automotive power inverters for motor control are under development. As a project demonstrator, a 10 kW module with IGBTs and diodes at 400 V / 500 A, was manufactured. This demonstrator is based on high power PCB technology and was fully characterized; the results will be presented in detail. Recently started research projects will face the challenges of MW solar inverters at 1000 A and 1000 V, using SiC semiconductors as switches. First concepts will be presented as an outlook.