New interpretation model of the effect of short PE fibers in TRM on tensile behavior

Abstract

An experimental investigation was conducted on the tensile behavior of textile reinforced mortar (TRM) composites containing different volumes of short polyethylene (PE) fibers in a cementitious matrix to improve the tensile strength and cracking mode of TRM. This investigation mainly aimed to study the action mechanism of short fibers and propose a reasonable textile-short fiber-matrix interface model. The short fiber content was varied, as was the matrix type and the number of grid layers. Ten groups of TRM tensile specimens subjected to the monotonic uniaxial tensile loading were fabricated and tested to examine their tensile characteristics. The results showed that the multiple-cracking behavior and failure mode of TRM were significantly improved by adding PE fibers into the matrix. The tensile strength was increased by 25.8–167.2 %. After the uniaxial tensile tests, the microscopic investigation of the interface between the textile and matrix was conducted on the tensile specimens using an environmental scanning electron microscope (ESEM). The significant influence of the short PE fibers on the improvement of the interface bonding between the textile and matrix was confirmed. More importantly, based on the ESEM results, a novel interface model was proposed to promote understanding of the action mechanism of short fibers.